Sale!
SharkBite U715A Universal Disconnect Tongs, Push-to-Connect Fittings, SharkBite Fitting Removal Tool, 1 Inch
Original price was: $24.32.$20.27Current price is: $20.27.
- REMOVES IN SECONDS: 1 Inch disconnect tongs remove push to connect fittings; just use the disconnect tongs to make any adjustments
- COPPER, PEX, CPVC, CTS, HDPE: SharkBite disconnect tongs removes plumbing fittings that fit copper tubing, CTS, CPVC, HDPE, and PEX and connects all three types in any combination
- QUALITY: Only SharkBite’s quality and performance is field-proven and trusted in the plumbing industry
- PREFERRED BY THE PRO: All SharkBite fittings meet the same standards for commercial and residential plumbing applications
- MADE IN THE USA: All SharkBite valves, clips, joints, and adapters are manufactured and tested in the USA
- No soldering, clamps, unions, or glue required.
- Connects copper, PEX, and CPVC pipe in any combination.
- Approved to be used underground and behind walls without access panels.
Technology for Efficient Plumbing
SharkBite manufactures plumbing systems for residential and commercial applications. For more than two decades, SharkBite has been at the forefront of innovating products that solve problems and help the trade work more productively and efficiently. SharkBite solutions work across a wide range of applications, including single-family and multifamily home construction, repiping, remodel, service and repair work, and water heater installations.
SharkBite Disconnect Tongs
Make a mistake? No problem with SharkBite. Mistakes are fast and easy to fix using this disconnect tong tool. The wide grip handles allow for easy one-handed operation and makes the disconnect tongs ideal for working in tight spaces.
- Place the disconnect tongs around the fitting assembly
- Squeeze the tongs together
- Done! Perfect for working in tight spots
|
|
|
|
|---|---|---|
CutCut the pipe square removing rough edges and debris. Mark the pipe to the correct insertion depth. |
PushPush pipe and fitting together up to the depth mark. |
DoneOnly when the pipe has passed through the o-ring and reaches the tube stop is the secure joint created. |
 |
 |
 |
 |
 |
 |
|
|---|---|---|---|---|---|---|
| PEX Tube Cutter | PEX Pipe | Disconnect Tongs | 90-Degree Elbow | Straight Coupling | End Cap | |
| Sizes Available | 1/4, 3/8″, 1/2″, 3/4″, 1″ | 1/4″, 3/8″, 1/2″, 3/4″, 1″ | 1/2″, 3/4″, 1″ | 1/2″, 3/4″, 1″ | 1/2″, 3/4″, 1″ | 1/2″, 3/4″, 1″ |
| Application | Makes clean, straight cuts in PEX pipe. | Residential and commercial plumbing. | Disconnects pipe from PEX, CPVC or copper tubing. | Joins copper, CPVC, HDPE or PEX pipe. | Joins copper, CPVC, HDPE or PEX pipe | Cap off copper, CPVC, HDPE or PEX pipe. |
You must be logged in to post a review.
Related products
-
Mop and Broom Holder Wall Mount, Heavy Duty Holds Up to 25 lbs,Garage Garden Tool Organizer, Ideal Broom Hanger Tool Rack Storage for Kitchen Garage Laundry Room (3 Racks 4 Hooks Green)
Original price was: $26.92.$22.43Current price is: $22.43.Add to cart- ??Strong And Sturdy??Our broom holder is made of SUS 304 stainless steel, triangle-buckle and size adjustable petal-shaped gear, more strong and sturdy than plastic holder.
- ??Space Saver??The broom holder wall mount has 3 Unit Clamps and 4 Utility Hooks, total 7 positions. Perfect for keeping mop, broom, rake, umbrella, shovel, spray bottle, rag, brushes, dustpan, duster, baseball bat, pool stick and other garden kitchen tools neatly arranged.
- ??No-Slide Guarantee??With the double rubber gripped slots, wet mops, rakes or baseball bats will always keep on the broom holder. You do not have to worry that the tools will drop to the floor.
- ??Easy Installation??This broom holder is so easy to install and use, screws drilling and self-adhesive for your options to setup the utility racks for brooms and mops, along with clear step-by-step instructions, you can choose the best way for yourself. (For weighty or outdoor hanging,screws drilling is recommended )
- ??Widely Applicable??With its compact sizing and strong organizational skills, you will totally say goodbye to messy. Clean and organize your garage, garden, kitchen, laundry room, offices and anywhere you want.
-
Baomain Manual Hand Lever Control Valve 4H210-08 G1/4″ Air Inlet 5 Way 2 Position
Original price was: $30.08.$25.07Current price is: $25.07.Add to cart- Operation Type: Manual; Working Medium: Clear Air
- Port Size : Air Inlet (P)=1/4PT; Air Outlet(A B)=1/4PT; Air Exhaust(R S)=1/8PT; CV value: 0.89
- Working Pressure Range: 0.15-0.8MPa; Total Size: 75 x 34x 21mm / 3″x 1.4″x 0.9″ (L*W*H);
- Material : Alloy; Net Weight : 153g; Package : 1 x Hand Lever Control Valve
-
Marble Vinly Paper, 17??100inch Granite Gray/White Self Adhesive Wallpaper Roll Thick Waterproof Gloss Vinyl Film Stickers Oil Proof For kitchen Countertop Cabinet Furniture Shelf Liner.
Original price was: $28.49.$23.74Current price is: $23.74.Add to cart- SELF ADHESIVE & THICK:Marble Self Adhesive Vinyl Paper,Tear off the adhesive liner and stick to any dry, flat surface. PVC material, smooth surface, water, oil, dust, moisture, easy to clean, self adhesive (No need for additional glue).
- MULTI USE&DECORATIVE:Ideal for DIY any size of cabinets, smooth countertops, notebooks, dresser drawers, handicrafts, nightstands, bookcases, shelves, doors and even walls
- EASY INSTALLATION: Marble Self Adhesive Paper,Quick and Easy to install, just peel and stick,save your time and budget
- ROLL SIZE: Marble Self Adhesive Paper 17 wide x 100 inch long(43.5*254CM)
- covers 11.8 square feet( Cover 1.1 Square Meter per roll)
- Premium packaging with a Core Tube Insert. To avoid wrinkles, folds, or any other damage upon arrival.Vinyl Wrap.
-
5 Inch Hook and Loop Sander Replacement Backing Pad for Ridgid R2600 and R2601, Craftsman 315.112170, Ryobi RS290, Milwaukee 6021-21 Random Orbit Sander
Original price was: $25.32.$21.10Current price is: $21.10.Add to cart- ???Compatible Machines??The 5″ Hook & Loop sander backing pad is a replacement pad for Ryobi #300527002 and is compatible with Ryobi RS290, RS240, RS280/RS280VS, RS281VS, P411 Random Orbit Sander.
- ???Durable Construction??Designed for sanding flat surfaces, these replacement pads are made from high-quality, durable rubber for long life and engineered to provide smooth finishes, prevents damage to disc holders.
- ???Easy Screw-on Installation?? Build-in 3 mounting screw holes for quick and easy installation, and for increased abrasive paper grip
- ???8 Dust Collection Holes?? Efficient 8-hole pad works with sanders that have dust collection system. 8 dust collection holes that vacuum up the dust and debris into Dust Bag Assembly.Ultra convenient dust collection feature.
- ???Save Sander & Money?? The sander pads wear out before the machine does, so replacing the pads is a cost effective option.
Reviews
There are no reviews yet.