Sale!
Pure Silicone Tubing, 1″ ID x 1-1/4″ OD High Temp Food Grade Tube Pure Silicone Hose Tube for Home Brewing, Beer Line, Kegerator, Wine Making, Aquaponics, Air Hose by Proper Pour (3.28 Ft)
Original price was: $51.47.$42.89Current price is: $42.89.
- 1″ ID x 1-1/4″ OD pre-cut flexible silicone tubing. High quality, flexible silicone compound in compliance with FDA and 3A Sanitary Standards.
- Flexible tubing for air, water, food, and beverage – durometer: 50A
- ??Good Performance??Lightweight, flexible, and crystal-clear, tubing provides excellent resistance to chemicals, solvents, alkalis, and acids. Smooth inner surface for easy flow and easy cleaning. BPA Free and non-toxic.
- ??Industrial Application??This extremely flexible, food grade silicone is suited for general low pressure industrial applications for the conveyance of chemicals, liquids, gases, and solids of suitable granular size, such as factory air lines automation machinery and pneumatic lines.
- ??More Application??Its many suitable uses include pumps, shiphons, filters, AC and HVAC tubing, drain valve connections, filters, plumbing, drip irrigation, ponds and gardens, beer brewing, wine making, and more. Great for fluid handling, peristaltic pumps, siphoning, draining, aquaponics and water/oil change, etc. Because of its versatility and the ability to be used in a wide range of applications, it is a great value for your money.
If you’re tired of hard PVC hoses that crack or collapse when bent, try using silicone tubing instead. Once you use silicone tubing, you won’t go back. Silicone is UV resistant; it does not age and deteriorate outdoors. The tube is very pliable and stretchy, allowing you to make tight turns and stretch it over barbs that are a little too big. This type silicone tube is very versatile – common uses are small water pumps such as PC water cooler radiators, blocks and pumps, small pumps for fountains, solar, coffeemakers, and other applications. This tube has a thick wall so it can accommodate a bend radius. U-turn without the tube collapsing when empty. And what is so awesome about silicone, is that even if it collapses, it will spring back without any creases, because the material is incredibly stretchy and resilient to damage.
You must be logged in to post a review.
Related products
-
403A 134A Super Cold Spray, 400g (14 Oz) Aerosol Can
Original price was: $58.45.$48.71Current price is: $48.71.Add to cart- Non-flammable; Safe for use on energized circuits
- Chills down up to -50 ??C (-60 ??F)
- Non-conductive
- Zero residue, VOC exempt
- Suitable for Use in Food Facilities as a Non-Food Chemical??Canadian and NFS recognition letters available on request
- Applications: Coolant for diagnosing thermally intermittent faults in electronic device components
-
Mini Traffic Light LED Display Module DC5V Red Yellow Green LED Module with F/M F/F Dupont Cable for Arduino Micro:Bit(Pack of 5)
Original price was: $20.52.$17.10Current price is: $17.10.Add to cart- 1, DC5V mini Traffic Light LED Module, economical option for the Electronic Building Blocks for Arduino Nano Traffic Light System Model, and compatible with Micro: bit Raspberry Pi.
- 2, Red, Yellow, Green, 8mm LED, common cathode, each color could be controlled individually. Each LED lamp can only emit one color of light. High brightness, suitable for the traffic light system model and school scientific research projects.
- 3, Power supply voltagec – DC5V, Input – digital signal output. It can work with 3.3V and 5V.
- 4, The wiring of the module for Arduino board is simple, GND to GND, R Y G to the I/O interface Pin#2 3 4.
- 5, What you will get is 5pcs mini 5V Traffic Light LED Module, 1pc 20P Female to Male Dupont Cable, and 1pc 20P Female to Female Dupont Cable.
- 6, If you have any question, please contact us by clicking “Wishiot” under the shopping cart(you can find “Sold by Wishiot” under Buy Now button), in the new page, click “Ask a question” to email us.
-
SAILFLO 12 Volt Water Pump 12v Diaphragm Pump Self Priming Psi Pump 35PSI/70PSI/80PSI/100PSI for RV Caravan Boat Marine
Original price was: $57.01.$47.51Current price is: $47.51.Add to cart- This pump may be used for general water transfer, sprayer pumps, small rain system, or other industry usage (Liquid with weak acid & alkaline is ok)
- SPECIAL FUNCTIONS: Durable rubber feet for reduced vibration Long life Self Priming Built-in Check Valve Easy Installation PUMP 2 Chamber Diaphragm (3/8??) 10mm Hose barb inlet/outlet Liquid: 60??C Max Self-priming: Within 1.5M Pressure PSI: 35 PSI ELECTRICAL Motor: 12V Permanent Magnet, Intermittent Duty Protection: Thermal Overload, Automat
- Perfect For sinks, taps, showers, or toilets Other applications where you have to transfer water
- This pump will automatically turn off when pressure builds up such as turning off the tap on outlet hose & will automatically turn back on when you turn the tap on, also fitted with manual on/off switch on rear.
- We offer 30 Day money back Guarantee & 12 Months Canada Warranty
-
DURAMIC 3D PLA Plus (PLA+) Filament 1.75mm Black, 3D Printing Filament Professional Tough PLA Plus 1.75mm Dimensional Accuracy +/- 0.05 mm, 1kg Per Spool
Original price was: $42.76.$35.63Current price is: $35.63.Add to cart- RISK-FREE SERVICE & PACKAGE – What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you??re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm PLA Plus filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool. Professional printing advice from technique support team.
- PREMIUM PLA PLUS & COST-EFFECTIVE- Produced with USA high purity raw material from Natureworks. Duramic premium PLA+ filaments are 8 times tougher and incredibly easy to print, but at the same price level as basic PLA from other brand. Recommended Nozzle Temp: 220??10C.
- ACCURATE&CONSISTENT DIAMETER – Duramic uses digital caliper system which measures the diameter 5000 times/s and adjusts them automatically, with tolerance 100% ??0.05mm, 99.9% ??0.04mm, 99% ??0.03mm and 97% ??0.02mm.
- JAM-FREE& SMOOTH PRINTING – Duramic 3D PLA plus filament features unique patented Jam-free technology and 100% vacuumed package in resealable with desiccant, which makes no room for clogging and bubbling.
- USER-FRIENDLY & COMPATIBLE – Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling.
Reviews
There are no reviews yet.