Noico 80 mil (2mm) 36 (3.4 sqm) sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
Original price was: $226.78.$188.98Current price is: $188.98.
- The cost effective 80 mil (2 mm) automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil (2 mm) is 1,5 times better in comparison to sound deadening material of 50 mil (1.3 mm). The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening mat has a total weight of 0.7 lbs/1sqft (3.7 kg / 1 sqm). This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil (2mm) thickness material. Noico 80 mil (2mm)is full weighted sound deadening material!
- Car insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil (2mm); Total coverage area of 36 sq.feet (3.4 sqm); Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 29.5×19.5 inch (760 x 500 mm). Roller is not included.
HOW TO INSTALL
Please carefully read a service instruction up to the end. It is important to familiarize oneself with all the details as efficiency of soundproofing doesn’t just depend on material you use but mainly is a result of correct installation. Please note that incorrect installation might lead to undesirable results or no effect at all.
STEP 1
Decide what part of a car you want to insulate in first place: floor, roof, doors, trunk or firewall. Treatment of each metal part of car has its unique contribution to overall effect. With that being said, we recommend to soundproof all metal parts for maximum performance. Next, find a service manual to your particular vehicle and locate a part that explains as to how to dismantle the trimming panels. You’d have to be carefull when taking them off and avoid breaking the fixing clips. That sort of information could be also found on a relevant automotive forums.
STEP 2
Remove the remains of factory insulation once trimming is dismantled. You only need to do that if the factory insulation is damaged or not properly fixed. You can leave it there if it’s still in a good shape. Next step is to properly clean, dry and degrease the prospective surface. Sound deadening won’t adhere properly and may not last long if applied to wet or dirty surface. Use a degreaser and dry, clean rag for this purpose. We also recommend wearing gloves and to air a room from time to time during the work. * Pre-try a degreaser on a small spot before using that on plastic or painted parts.
STEP 3
Once step 2 is complete, measure the prospective surface that you are going to treat. Quick tip is to first make a template of appropriate size on a paper and then transfer it to deadening mat. That will help to place it accurately and avoid wasting a material. Use a stationary knife or construction scissors to cut a desired shape and size. Be careful and use gloves for your hands protection.
STEP 4
Next, place a deadening mat to the surface without removing a protective film. Make sure that it properly covers the surface. Now it’s time to remove the protective paper film but do not pull it all at once, do that gradually for better adhesion. Once on a surface, press it down and let it glue. Flatten the sheet with your hands to avoid air bubbles between a mat and metal surface. Use a rolling tool to press mat down to a metal surface. Special dimples-like foil embossing on a mat surface allows to see the spots that need more pressure. You’d have to roll it down till the foil texture becomes smooth and plain which m
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|---|---|---|---|
Related products
-
45040 Brake and Parts Cleaner (Non-Chlorinated), 13.8 Ounces
Original price was: $23.82.$19.85Current price is: $19.85.Add to cart- An advanced formulation of cleaning solvents that quickly dissolve and remove grease, oil, brake fluid, road grime and dirt from brake parts, CV joints, disc pads, drums and other components.
- It also helps to reduce brake squeal and there is no residue, is fast drying and has a low odour.
- Directions: Spray brake parts liberally and allow dirt and grime to run off. Wipe with clean cloth or let air dry. Repeat as necessary.
-
GP050 (CA12050) Replacement for Honda Rigid Panel Air Filter for Civic 1.5L (2016-2021), CR-V 1.5L (2017-2021)
Original price was: $25.14.$20.95Current price is: $20.95.Add to cart- Helps extend performance. Protect against dirt.
- Improve fuel mileage, Recommended replacement every 12,000 miles.
- Replacement for Fram CA12050, Replacement for Honda Genuine Part# 17220-5AA-A00.
- Compatible Auto Models: Honda: Civic 1.5L (2016-2021), CR-V 1.5L (2017-2021)
- Companion Cabin Air Filter: CP182 (CF11182).
-
Searlleng 4 Pieces 75mm Dark Blue Center Wheel Hub Caps for Mercedes-Benz,Applicable to All Models
Original price was: $26.92.$22.43Current price is: $22.43.Add to cart- Classy finish for your alloy rims . Fits with All Mercedes-Benz with wheel opening diameter of 75MM
- Not only beautiful, but also functional. The Mercedes Benz Wheel Center Caps protect the hub from dirt.
- An easy, cost effective and quick way to upgrade your car appearance with these Mercedes Center Caps set of 4.
- make sure this cap will fit for your vehicle. Part Numbers: 2204000125 A2204000125 A 220 400 01 25 B66470200
- An easy, cost effective and quick way to upgrade your car appearance with CLICK ADD TO CART NOW to get your Mercedes center caps!
-
1-Gauge 800A Heavy Duty Jumper Battery Cables 25 Ft Booster Jump Start – 25′ Allows You to Boost Battery from Behind a Vehicle!
Original price was: $115.15.$95.96Current price is: $95.96.Add to cart- ENERGIZER 1 GAUGE JUMPER CABLE – 1 Gauge 25 Ft booster battery jumper cables for jump starting a dead or weak battery. Ideal for vans, large-size SUVs, full-size cars, mid-size cars, trucks and small/compact cars
- TANGLE FREE CABLES – 25 Foot length makes it easy to reach from one car battery to another. Copper clad aluminum cables remains flexible even at -40??C.
- INCLUDES TRAVEL BAG – Booster Cable comes with a travel bag for easy transport and compact storage.
- THE BRAND NAME YOU CAN TRUST – We are here to power your car battery and truck with our booster jumper accessories. We keep you going and going! Includes a 2 Year Warranty!
