3:1 Heat Shrink Tubing Adhesive-Lined Heat Shrinkable Tube Waterproof Insulation Sealing DIY Black (5Ft (1/2 inch (12.7mm))
Original price was: $54.64.$45.53Current price is: $45.53.
- Safety and Environmental Protection: Purple-fox heat-shrinkable tubes are UL and CSA certified, RoHS compliant, free of formaldehyde (HCHO), heavy metals and other harmful substances protecting you and your family from toxins
- Versatile and DIY Helper: High-quality heat shrink tubing, they can be used for solder joint protection, group of lines marking, resistance electric capacity reason protection etc. Note: Make sure temperature of your heat gun is up to 212???Fahrenheit), then glue inside will soften and seal the connection.
- Great Advantages : Our heat-shrinkable tube are with glue lined which has the advantages of good electrical insulation, good sealing, corrosion resistance and high temperature resistance. Anti-aging, tough, not easy to break.
- Easy and fast: It is 3:1 heat shrink ratio, and will shrink up to 1/3 of original, only use a lighter heating if the tube is small or hair dryer heating or heat gun for large one.
- Widely Applications: Heat-shrinkable tubes are mainly used for wire links, anti-rust and anti-corrosion protection of solder joints, and audio and electrical DIY. Wire ends, harnesses, electronics protection and insulation treatment. Fitness equipment parts and steel structure surface protection and so on.
Feature:
Adhesive Lined Heat Shrink Tubing Sleeving
Material: polyolefin
Main color: black
Ratio: 3:1;
Round diameter: 12.7mm (1/2″)
Shrink temperature: 80C;
Fit for: appliance/Auto wire harness
Each Length: 1.5M/ 5Ft;
temperature range: -55C to +125C
Rated voltage:600V
Beginning shrinking temperature:80C,
Completely shrinking temperature: 120C
package content: 1 x heat shrink tubing(1.5m Length/5Ft )
Advantage:
Tough flame-retardant polyolefin tubing lined withal flame-retardant adhesive provides the optimum solution for applications where full flame retardant is preferred.
Dual wall heat shrink tubing is suitable for shrinking and sealing connectors, wires, and cords etc., which will be exposed to harsh environments.
How to use it?
1. First choose the right size tubes, as it is 3:1 heat shrink ratio, and will shrink up to 1/3 of original diameter.
2. Wrap the cable wire with the tube, then use a lighter heating if the tube is small or hair dryer, heat guns heating for large one until the wire was wrapped tightly.
3. Don’t touch the tube until it becomes cool.
You must be logged in to post a review.
Related products
-
Little Giant 599065 CV-10 Condensate Pump Check Valve for VCC, VCM, VCMA and VCL-14/24, 1/4-inch MNPT x 3/8-inch Barbed, Black
Original price was: $32.48.$27.07Current price is: $27.07. -
ZEP ZUABS3 Instant Absorber
Original price was: $45.14.$37.62Current price is: $37.62. -
20pcs Robojax IRFZ44N IRFZ44 N-Channel Power MOSFET 55V 49A
Original price was: $46.88.$39.07Current price is: $39.07.Add to cart- Includes 20 pieces of IRFZ44N IRFZ44npbf N-Channel Power MOSFET
- Drain source voltage voltage: 55V Drain Current: 49A
- Drain-source resistance: 17.5m??
- Package: TO-220
- Full details in data sheet: http://robojax.com/L/?id=299
-
DURAMIC 3D PLA Plus (PLA+) Filament 1.75mm Black, 3D Printing Filament Professional Tough PLA Plus 1.75mm Dimensional Accuracy +/- 0.05 mm, 1kg Per Spool
Original price was: $42.76.$35.63Current price is: $35.63.Add to cart- RISK-FREE SERVICE & PACKAGE – What you get: One-month free trial, Lifetime Quality Promise and Money-back Service if you??re not 100% satisfied. Package Includes: 1 x 1kg Spool of 1.75mm PLA Plus filaments, 1 x Resealable bag with desiccant for better storage of unfinished spool. Professional printing advice from technique support team.
- PREMIUM PLA PLUS & COST-EFFECTIVE- Produced with USA high purity raw material from Natureworks. Duramic premium PLA+ filaments are 8 times tougher and incredibly easy to print, but at the same price level as basic PLA from other brand. Recommended Nozzle Temp: 220??10C.
- ACCURATE&CONSISTENT DIAMETER – Duramic uses digital caliper system which measures the diameter 5000 times/s and adjusts them automatically, with tolerance 100% ??0.05mm, 99.9% ??0.04mm, 99% ??0.03mm and 97% ??0.02mm.
- JAM-FREE& SMOOTH PRINTING – Duramic 3D PLA plus filament features unique patented Jam-free technology and 100% vacuumed package in resealable with desiccant, which makes no room for clogging and bubbling.
- USER-FRIENDLY & COMPATIBLE – Universal compatibility with diverse FDM 3D printers in market. User-friendly with length scale and weight scale to monitor remaining length and weight easily. The storage hole is designed to place the end of the filament to prevent tangling.
Reviews
There are no reviews yet.