SpeTool Spoilboard Surfacing Router Bit, 1/2 inch Shank 2.5 inch Diameter, 4-Wings Planing bit for Wood Slab Flattening

This professional bottom cleaning router bit is not only perfect for wood slab flattening, resurface or plane the top surface of the spoilboard, but also for trimming and slotting/grooving. Great replacement bit tool for woodworking
4 wings wood cnc router, Shank: 1/2″; Cut diameter: 2-1/2″; Carbide Inserts 12*12*2.2mm,replace the inserts when needed ,the inserts will be available on asin “B08V8PWL6S”
Contains four cutting flutes, which provide a better cutting result
MDF, LDF, fiberboard, plastic, plywood, hardwood, softwood, etc
Use on CNC and other automatic routers as well as hand-held and table-mounted portable routers. Such as woodworking engraving machine, trimming machine, etc.

INSERT ROUTER BIT

You’ll always work with sharp cutting edges, even if you have an unfortunate run-in in the middle of your slab…just remove the screw, spin the insert 90°, and get right back to work

Advantage of the insert router bit

The insert router bits are an excellent investment for cabinet shops that produce work that requires repetitive router function as the cost of the carbide knives will bring substantial savings over time to the cabinet maker.

Router bits with insert knives contain a radial and axial groove for better positioning and security of axial knife moving. These router bits with insert knives are for finishing, routing, plunge cutting, grooving and other executions in boards materials (laminated DTD, MDF) and hard wood, to be used on power tools and CNC machines. In router bits, knives can be replaced or inverted fast to operate on different wooden materials in a little time.


Cost Effective Spinable and replaceable inserts, no need to change the whole router bit, long service life, greatly reducing the cost of use	Advantages of The Insert YG-6X tungsten carbide with high hardness, more sturdy and durable. 2.2mm thickness, longer using life. 35 ° Cutting bevel, the most efficient degree.	Advantages of The Shaft High-quality solid steel with excellent rigidity and good resistant to bending or damage. Shaft length, extra Long, deeper processing, can meet more needs. Smooth rotation. Each item is submitted to strict quality tests to ensure perfect cutting tolerance, balance and excellent concentricity.	Suitable Material Suitable for oak, larch and other soft and hard woods, cast resin materials, epoxy resin materials, medium density fiberboard, plywood, laminates, etc.


	IP3F-D2-H1/2	IP4F-D2-1/2-H1/2	IP2F-D1-H1/4	IPA-D12-H2.2	IPA-D10-H2.2
Cutting Dia	2″	2-1/2″	1″	12mm	10mm
SHank Dia	1/2″	1/2″	1/4″
Thickness				2.2mm	2.2mm
Partner	IPA-D12-H2.2	IPA-D12-H2.2	IPA-D10-H2.2	IP3F-D2-H1/2&IP4F-D2-1/2-H1/2	IP2F-D1-H1/4

SpeTool Spoilboard Surfacing Router Bit, 1/2 inch Shank 2.5 inch Diameter, 4-Wings Planing bit for Wood Slab Flattening

INSERT ROUTER BIT

Advantage of the insert router bit

Cost Effective

Advantages of The Insert

Advantages of The Shaft

Suitable Material

Reviews

Related products

MEIYYJ 10 Kinds Small Multi-Purpose M1 M1.2 M1.4 M1.7 Phillips Head Micro Screws Self-Tapping Electronic Screws Assortment Kit Pack of 1000

100Pcs Sandpaper Set, 5 inch 8 Holes Sanding Discs for Orbital Sander, 5 Different Grades Including 60, 80, 100, 120, 240 Grits

BOKYWOX 110-120V Domestic Circulation Pump 3/4”,3-Speed Hot Water Circulator Pump (RS15-6 SB)

Hard-to-Find Fastener 014973291426 Phillips Flat TwinFast Wood Screws, 4 x 3/4-Inch, 100-Piece