3D PLA Printer Filament, 1.75mm +/- 0.03mm, 3D Printing Material PLA-at, Net Weight 1kg Spool (2.2lbs), 330m/1082ft per Roll with Vacuum Package

【Features of PLA-AT Filament】Based on PLA filament. PLA-AT has ungraded and optimized the softness, toughness, and interlayer adhesion, which makes less snapping in printing and is not easy to crack and deform.
【No Clogging & Bubbles, Easy to Use??Our 3D printer filaments are produced with no clogging technology, fully dry 24 hours before packing, vacuum-sealed in a transparent bag, making printing smooth, and ensuring you have a good printing experience.
【Mechaniacl Winding & Less Tangle??Full mechanical winding and strict manual inspection make 3D printing filaments neat and free of knots, easy to feed, and less breakage. The printing process will be smoother and the effect can be better. The PLA-AT 1.75mm filament is compatible with most FDM 3d printers on the market.
【User-friendly Spool Design??3D printed spools are marked with length scales and weight scales for easy and accurate monitoring of the length and weight. The storage hole design can be used to put the end of the filament to prevent tangles, which is convenient and convenient, and it is also friendly to beginners.
【High-quality and Professional R&D Team??With over 5 years of specializing in 3D filaments R&D, we are able to research more excellent and upgraded filaments, and mass-produce high-quality filaments with very strict manufacturing precision standards.

3D PLA printer filament, PLA-AT filament 1.75mm with dimensional accuracy 3D printer consumable

PCUTE 3D Printer PLA-AT 1.75mm Filament

PLA-AT is an upgraded version based on PLA Filament. PLA-AT is with good toughness and layer adhesion, easier to print, and with a higher success rate. The print is tougher and not easy to be cracked and deformed.

Fit Most FDM 3D Printers

Printing Tips

1, Printing Temperature: 190-220?? Hotbed temperature: 0-60??

2, Increasing extrusion can strengthen layers bonding;

3, Fill and Shell Overlap Ratio is suggested between 20-35%, which depends on printing needs;

4, The layer adhesion of PLA-AT is not so strong, so the thickness of print is recommended to be four layers.

5, You can first print some small models to test this filament and know some features of PLA-AT.

PCUTE 3D Printer PLA-AT 1.75mm Filament

Full mechanical winding, strict manual inspection, to ensure that the lines are neat and free of knots, easy to feed, avoid wire breakage, the printing process is smoother, and the effect is better. Our 1.75mm PLA filament is compatible with most FDM 3d printers on the market.

Specification:
Recommended Extrusion/Nozzle Temp: 190°C – 210°C (374℉~ 410??
Heated Bed Temp: 0°C – 60°C (32??~140??
Dimensional Accuracy +/- 0.03mm
Printing Speed: 30~70 mm/s (1800mm~4200 mm/min)
Filaments Net Weight: 1 kg (2.2 lbs)

3D PLA Printer Filament, 1.75mm +/- 0.03mm, 3D Printing Material PLA-at, Net Weight 1kg Spool (2.2lbs), 330m/1082ft per Roll with Vacuum Package

PCUTE 3D Printer PLA-AT 1.75mm Filament

Printing Tips

PCUTE 3D Printer PLA-AT 1.75mm Filament

Reviews

Related products

Heat Shrink Tubing 270 pcs, 3:1 Heat Shrink Tube with Glue, Shrink Tubing with Storage Box 6 Sizes(Dia) for Cable Wire Repair DIY (Black and Red)

Acrylic Sheet Clear Cast Plexiglass 12 x 12 Square Panel 1/8 Thick (3mm) Pack of 2 Transparent Plastic Plexi Glass Board with Protective Paper for Signs, DIY Display Projects, Craft

22783 5/8″ x 25′ Reinforced Fresh Water Hose

(244-2926) 1/2″ x 14 NPT x 1/2″ Barb Straight Wingnut Swivel Adapter