1/2″ Shank Straight Router Bit Woodworking Flush Trim Router Bit Tool 2-1/2″L x 3/4”Dia with Long Cutter, Top and Bottom Bearing

Professional grade cemented carbide, high hardness and durable, long service life
Industrial quality router bits with sharp cutting edge can improve working efficiency
Heat resistant coating design prevents build-up of sawdust and resin
Great for finishing a wide range of materials including solid wood, MDF, chipboard, plywood, etc
Well packaged in bubble bag, safety and quality guaranteed

WOODWORKING BEARING FLUSH TRIM ROUTER BIT TOOL

THIS WOODWORKING BEARING FLUSH TRIM ROUTER BIT TOOL IS USUALLY USED ON ELECTRIC WOOD CUTTERS OR ENGRAVING MACHINES TO TRIM WOODEN EDGES. IT CAN BE USED TO TRIM VARIOUS MATERIALS, INCLUDING SOLID WOOD, MEDIUM DENSITY FIBERBOARD, PARTICLE BOARD, PLYWOOD, ETC.

DETAIL


LOCATING BEARING HIGH-QUALITY POSITIONING BEARINGS IMPROVE WORK EFFICIENCY AND ENSURE STABLE CUTTING	HEAT-RESISTANT COATING THE YELLOW HEAT-RESISTANT COATING PREVENTS WOOD CHIPS AND RESIN FROM ACCUMULATING.	CARBIDE TOOL HOLDER CARBIDE DRILL BIT, MAINTAIN HIGH HARDNESS AND DURABILITY, CAN BE USED FOR A LONG TIME

Tool selection

To achieve what you need, be sure to use short-edged knives as much as possible. Too long cutting edge or too long tool body will cause vibration and deviation during machining, which will damage the tool and affect the quality of machining. It is recommended to use a tool with a larger shank diameter.

Tool operation

Woodworking milling cutters are specially designed for portable and desktop woodworking engraving machines, and cannot be used on electric drills, drill presses and other equipment.
The tool can process hardwood, softwood, synthetic board and other wood to polish a smooth surface, but avoid processing metal materials such as copper and iron and non-wood materials such as sand and stone.
Be sure to use the appropriate size of the jacket, because the wear is serious, the jacket is not round enough or the hole with the taper can not provide enough clamping force, which will cause vibration or twist the tool handle and fly off.
When the tool handle is found to have uneven contact marks or dents after the tool is clamped, it indicates that there is slippage and the inner hole of the jacket is changed. At this time, the jacket should be replaced immediately to avoid accidents.
After the tool is clamped, if the tool is found to be bounced while working, it should be stopped immediately, and the clamping should be repeated several times to allow the tool shank and the jacket to get sufficient contact before working.
The contact between the tool shank and the jacket should be good. The tool shank must be completely inserted into the jacket and tightened firmly, so as to provide sufficient clamping force for the tool. Only a small part of it cannot be inserted into the jacket, otherwise it will be easy. The tool handle is broken and the tool is damaged.
Use proper eye and ear protection devices during operation, and keep your body, clothes and other sundries away from the working tool

Reviews

There are no reviews yet.

Be the first to review “1/2″ Shank Straight Router Bit Woodworking Flush Trim Router Bit Tool 2-1/2″L x 3/4”Dia with Long Cutter, Top and Bottom Bearing”

You must be logged in to post a review.

SKU: HV5WF7570B Category: amp; Home Improvement

Related products

Sale!

3M Half Facepiece Reusable Respirator 6300, Gases, Vapors, Dust, Paint, Cleaning, Grinding, Sawing, Sanding, Welding, Large
Original price was: $38.76.Current price is: $32.30.
COMFORTABLE: Soft, lightweight facepiece with easy-to-adjust head straps for a customized fit

DURABLE and REUSABLE: Respirator can be disassembled, cleaned, and reused Supplied with reclosable storage bag

HELPS REDUCE EXPOSURE to particulates and a wide variety of gases and vapors when used with approved cartridges and filters

USE WITH OTHER PPE: Adjustment points located on facepiece for improved compatibility with other personal protection equipment

APPLICATIONS: chemical handling, chipping, chiseling, cleaning, grinding, machining, masonry, painting, sanding, sawing, welding, construction, general manufacturing, industrial maintenance

COMPATIBLE: Bayonet connection is compatible with all 3M bayonet-style cartridges and filters

NIOSH approved for negative pressure air purifying and supplied air dual airline applications

For industrial/occupational use only Not for consumer sale or use
Add to cart
Sale!

Pegboard Hooks, with Bins, Peg Locks, for Organizing Various Tools, 204 PCS, 80 of Which are Locks
Original price was: $63.35.Current price is: $52.79.
??Package Contains??17 different types of pegboard accessories like paper towel holder, plastic bins, peg locks, curved hooks, two-pronged hooks, as the picture shows, 204pcs in total, 80 of which are locks.

??Material??Made from high quality iron, corrosion-resistant nickel plated finish ensures that the hooks will not rust or corrode.

??Specification??Fit all 1/8 and 1/4 inch metal, wooden or plastic pegboards with 1 inch spaced holes.

??Extendable??The paper towel holder could hold rolls which up to 7 inch in diameter and up to 14 inch in length.

??Bigger Pegboard Bins??The newly designed box has better strength and larger capacity, suitable for both wooden or metal pegboard.
Add to cart
Sale!

360 PCS 1 Inch Sandpaper, GOH DODD Wet Dry Sander Sheets with Backing Pad and Soft Foam Buffering Pad, 60 to 10000 Grits Grinding Abrasive Sanding Disc for Wood Metal Mirror Jewelry Car
Original price was: $98.15.Current price is: $81.79.
MULTIPLE GRIT SANDPAPER SET: comes with total 360 pieces abrasive sheet Accessories in grit 60 80 100 150 240 400 800 1200 2000 3000 5000 10000 with baking pad and Interface Pad for drill grinder. Each grit comes 30 sheets. You will have a variety of options.

WET AND DRY USING: 3000-10000 grit sandpapaer are made of high quality latex paper that can suitable for both wet and dry use, so you can use them on art and craft, wood work, painted surfaces, fiberglass, automotive, metal, jewelry, car, mirror and plastic applications for buffing and polishing.

GREAT DURABILITY: Made from premium aluminum oxide, delivering fast and long lasting sanding.

COMPATIBLE WITH: Most kinds of rotary tools, such as die grinders, air grinders, electric drills, etc.

12 MONTH WARRANTY & 100% SATISFACTION WARRANTY: All GOH DODD Products have 1 year no questions asked Money back Guarantee. If you are not completely satisfied with our product we will issue a full refund or ship out a replacement at the buyer’s request.
Add to cart
Sale!

Bosch SP510#10 Hex Shank Screw Pilot Bit
Original price was: $12.40.Current price is: $10.33.
Screw pilot bits ?C feature hex shanks for countersinking precision pilot holes

One-step operation ?C provides countersinking and counterboring in one operation

Replaceable drill bits ?C for longer accessory life

Adjustable Countersink depth ?C for use with an Allen wrench

Fits most drills ?C hex shanks fit corded and cordless drills. Ideal for drill Press
Add to cart

{"@context":"https:\/\/schema.org\/","@type":"Product","@id":"https:\/\/ca.mymm.store\/product\/1-2-shank-straight-router-bit-woodworking-flush-trim-router-bit-tool-2-1-2l-x-3-4dia-with-long-cutter-top-and-bottom-bearing\/#product","name":"1\/2\" Shank Straight Router Bit Woodworking Flush Trim Router Bit Tool 2-1\/2\"L x 3\/4''Dia with Long Cutter, Top and Bottom Bearing","url":"https:\/\/ca.mymm.store\/product\/1-2-shank-straight-router-bit-woodworking-flush-trim-router-bit-tool-2-1-2l-x-3-4dia-with-long-cutter-top-and-bottom-bearing\/","description":"Professional grade cemented carbide, high hardness and durable, long service life Industrial quality router bits with sharp cutting edge can improve working efficiency Heat resistant coating design prevents build-up of sawdust and resin Great for finishing a wide range of materials including solid wood, MDF, chipboard, plywood, etc Well packaged in bubble bag, safety and quality guaranteed","image":"https:\/\/ca.mymm.store\/wp-content\/uploads\/2022\/04\/51HHrPiHWPL._SL1001_.jpg","sku":"HV5WF7570B","offers":[{"@type":"Offer","price":"28.38","priceValidUntil":"2025-12-31","priceSpecification":{"price":"28.38","priceCurrency":"CAD","valueAddedTaxIncluded":"false"},"priceCurrency":"CAD","availability":"http:\/\/schema.org\/InStock","url":"https:\/\/ca.mymm.store\/product\/1-2-shank-straight-router-bit-woodworking-flush-trim-router-bit-tool-2-1-2l-x-3-4dia-with-long-cutter-top-and-bottom-bearing\/","seller":{"@type":"Organization","name":"MYMM\u00ae Store CA","url":"https:\/\/ca.mymm.store"}}]}

1/2″ Shank Straight Router Bit Woodworking Flush Trim Router Bit Tool 2-1/2″L x 3/4”Dia with Long Cutter, Top and Bottom Bearing

WOODWORKING BEARING FLUSH TRIM ROUTER BIT TOOL

DETAIL

LOCATING BEARING

HEAT-RESISTANT COATING

CARBIDE TOOL HOLDER