Noico 80 mil (2mm) 18 sqft (1.7 sqm) car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
Original price was: $118.78.$98.98Current price is: $98.98.
- The cost effective 80 mil automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil is 1,5 times better in comparison to sound deadening material of 50 mil. The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening mat has a total weight of 0.7 lbs/1sqft. This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil thickness material. Noico 80 mil is full weighted sound deadening material!
- Car insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil; Total coverage area of 18 sq.feet; Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 19,5×15 inch. Roller is not included.
HOW TO INSTALL
Please carefully read a service instruction up to the end. It is important to familiarize oneself with all the details as efficiency of soundproofing doesn’t just depend on material you use but mainly is a result of correct installation. Please note that incorrect installation might lead to undesirable results or no effect at all.
STEP 1
Decide what part of a car you want to insulate in first place: floor, roof, doors, trunk or firewall. Treatment of each metal part of car has its unique contribution to overall effect. With that being said, we recommend to soundproof all metal parts for maximum performance. Next, find a service manual to your particular vehicle and locate a part that explains as to how to dismantle the trimming panels. You’d have to be carefull when taking them off and avoid breaking the fixing clips. That sort of information could be also found on a relevant automotive forums.
STEP 2
Remove the remains of factory insulation once trimming is dismantled. You only need to do that if the factory insulation is damaged or not properly fixed. You can leave it there if it’s still in a good shape. Next step is to properly clean, dry and degrease the prospective surface. Sound deadening won’t adhere properly and may not last long if applied to wet or dirty surface. Use a degreaser and dry, clean rag for this purpose. We also recommend wearing gloves and to air a room from time to time during the work. * Pre-try a degreaser on a small spot before using that on plastic or painted parts.
STEP 3
Once step 2 is complete, measure the prospective surface that you are going to treat. Quick tip is to first make a template of appropriate size on a paper and then transfer it to deadening mat. That will help to place it accurately and avoid wasting a material. Use a stationary knife or construction scissors to cut a desired shape and size. Be careful and use gloves for your hands protection.
STEP 4
Next, place a deadening mat to the surface without removing a protective film. Make sure that it properly covers the surface. Now it’s time to remove the protective paper film but do not pull it all at once, do that gradually for better adhesion. Once on a surface, press it down and let it glue. Flatten the sheet with your hands to avoid air bubbles between a mat and metal surface. Use a rolling tool to press mat down to a metal surface. Special dimples-like foil embossing on a mat surface allows to see the spots that need more pressure. You’d have to roll it down till the foil texture becomes smooth and plain which m
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|---|---|---|---|
Related products
-
TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lb) Capacity, Black
Original price was: $213.05.$177.54Current price is: $177.54.Add to cart- Racing floor jack can be used for general or specialty use and features a 1. 5 ton (3, 000 lb) capacity
- Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height
- Lifting range from 3-1/2″ to 14-1/8″ allows you can gain easy access under low-profile vehicles
- Foam bumper on the handle helps protect your vehicle from damage; Convenient side handle makes it easy to carry
-
Black 2 Foot 4 AWG Battery Cable by Negative Lead with 5/16″ Ring Terminals
Original price was: $29.35.$24.46Current price is: $24.46.Add to cart- HEAVY-DUTY AMERICAN DESIGN: Unlike all those cheaply-made battery cables, the Spartan Power Made-in-USA 4 gauge battery cables are PVC insulated and professionally cut, crimped & heat shrunk in Reno, NV!
- FOR A LIFETIME OF SERVICE: Your inverter 4 AWG battery cables are not only sturdy & flexible, but they also feature 420 strands of 100% pure copper cable and 5/16″ lugs pre-assembled on both ends.
- ONE BATTERY CABLE, UNLIMITED USES: The Spartan Power positive or negative cables are ideal for car automotive, solar, marine, RV, motorcycle, lawn/garden equipment or power inverter batteries.
- NEED A SET INSTEAD? Need a positive AND a negative cable set? Search for: Spartan Power 4 AWG
- LIFETIME CRIMP WARRANTY: We believe these are the best 4 AWG battery cables on the market today, if you ever experience a crimp failure, Spartan Power will gladly repair or replace your cables for free!
-
36090 Small Engine Carb & Choke Cleaner, 170 g
Original price was: $14.24.$11.87Current price is: $11.87.Add to cart- Super jet spray to quickly cut and remove grease, gum, and varnish
- Oxygen sensor safe
- Applications: manual and automatic chokes, baffle plates, and carburetor linkage
- Premium Product
-
MIC_507_06 Professional Grade Premium Microfiber Towel, Gold (16″ x 24″) (Pack Of 6)
Original price was: $27.59.$22.99Current price is: $22.99.Add to cart- Scratch-Free, lint-free and swirl-free
- Long lasting microfiber
- Effective cleaning under wet and dry conditions
- Silk banded edges
- 100 Percent machine washable
