Name: Painter's Tape Masking Tape Contractor Grade, 18 mm - 2020
SKU: H74Z40000B
Availability: InStock

Painter’s Tape Masking Tape Contractor Grade, 18 mm – 2020

Designed for use on vinyl, carpet, metal, and plastic
3-day clean removal leaves behind no damage or sticky residue
Size: 18 mm x 55 m
Tape Application Tips: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
Tape Removal Tips: Wait until the paint is dry to the touch before removing the tape. Lift it up by slowly pulling it back on itself, then removing at a 45-degree angle.


	Original 2090	General Painting 2055	Contractor Grade 2020	Delicate 2080	Exterior 2097	Rough 2060
Days of Clean Removal	14 days	8 days	1 day	60 days	10 days	5 days
Walls & Ceilings	Lightly Textured Drywall (painted over 7 days ago), Plaster Walls			Lightly Textured Drywall (painted 1-7 days ago), Wallcoverings & Wallpaper
Baseboards & Door Trim	Wood Trim/Baseboards, Aluminum, Metal	Wood Trim/Baseboards, Aluminum, Metal, Vinyl	Aluminum, Metal, Vinyl
Floor	Unfinished Hardwood, Marble, Slate	Unfinished Hardwood, Carpet, Vinyl, Laminate, Linoleum	Carpet, Vinyl, Laminate, Linoleum	Finished or Engineered Hardwood		Unfinished Hardwood, Brick, stone, Grout, Concrete, Cement
Other Interior Surfaces	Countertops, Tile, Caulk, Window Glass, Hardware, Plastic		Plastic	Cabinets, Veneers		Brick Wall or Fireplace, Lacquer Coatings
Exterior Surfaces	Hardware, Window Glass, Trim (metal, wood) Siding (wood, non-rough clapboard)	Trim (metal, wood, vinyl)			Hardware, Window Glass, Trim (metal, wood, vinyl), Siding (wood, non-rough clapboard, vinyl)	Brick, Stone, Grout, Concrete, Cement, Trim (metal, wood), Siding (wood, non-rough clapboard)


Clean Surface The surface should be clean, dry and dust-free so the tape sticks properly.	Apply Tape Lay tape onto the surface, pressing down as you go. Don?M?? stretch the tape, or it may lift or break.	Secure Tape Press tape down firmly with a smooth edge, like a putty knife or credit card.	Let Tape Set Wait about 30 to 60 minutes before you begin painting.


Wait Wait until the paint is dry to the touch before removing the tape. Check the paint can for the manufacturer’s dry times.	Score Use a putty knife or razor blade to score along the edge of the tape. This prevents paint from being pulled up with the tape and from cracking along the paint line.	Tape Taking your time, lift up the painter?M?? tape and pull it back on itself, removing at a 45 degree angle. If adhesive sticks to the surface, try a 90-degree angle.	Clean Finish You?Mԩl get a sharp, clean line and a professional looking paint job!

Painter’s Tape Masking Tape Contractor Grade, 18 mm – 2020

Reviews