Noico 80 mil (2mm) 36 (3.4 sqm) sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening
Original price was: $226.78.$188.98Current price is: $188.98.
- The cost effective 80 mil (2 mm) automotive butyl and foil sound deadening! You are not just buying an excellent quality product but also saving more than 20% comparing to competitors as well!
- Now the material is 1,5 times thicker that will get you 1,5 times more effective insulation. Noico 80 mil (2 mm) is 1,5 times better in comparison to sound deadening material of 50 mil (1.3 mm). The thicker the material the more performance you get!
- Automotive self-adhesive insulation consists of butyl. Noico sound deadening mat has a total weight of 0.7 lbs/1sqft (3.7 kg / 1 sqm). This weight ensures maximum efficiency and sound insulation that could be possibly gained from 80 mil (2mm) thickness material. Noico 80 mil (2mm)is full weighted sound deadening material!
- Car insulation Noico has a special indicator as to if it is installed correctly. The special embossing on the foil must be rolled out with a roller till it is plain smooth, then you’ll be 100% sure that the soundproofing is set correctly and professionally! The sound dampening material comes in handy size sheets which make it easier in terms of cutting and installation process!
- Sound deadening material specifications: Nominal thickness 80 mil (2mm); Total coverage area of 36 sq.feet (3.4 sqm); Number of sheets in the stack 9 (sheets are folded); Nominal sheet Size 29.5×19.5 inch (760 x 500 mm). Roller is not included.
HOW TO INSTALL
Please carefully read a service instruction up to the end. It is important to familiarize oneself with all the details as efficiency of soundproofing doesn’t just depend on material you use but mainly is a result of correct installation. Please note that incorrect installation might lead to undesirable results or no effect at all.
STEP 1
Decide what part of a car you want to insulate in first place: floor, roof, doors, trunk or firewall. Treatment of each metal part of car has its unique contribution to overall effect. With that being said, we recommend to soundproof all metal parts for maximum performance. Next, find a service manual to your particular vehicle and locate a part that explains as to how to dismantle the trimming panels. You’d have to be carefull when taking them off and avoid breaking the fixing clips. That sort of information could be also found on a relevant automotive forums.
STEP 2
Remove the remains of factory insulation once trimming is dismantled. You only need to do that if the factory insulation is damaged or not properly fixed. You can leave it there if it’s still in a good shape. Next step is to properly clean, dry and degrease the prospective surface. Sound deadening won’t adhere properly and may not last long if applied to wet or dirty surface. Use a degreaser and dry, clean rag for this purpose. We also recommend wearing gloves and to air a room from time to time during the work. * Pre-try a degreaser on a small spot before using that on plastic or painted parts.
STEP 3
Once step 2 is complete, measure the prospective surface that you are going to treat. Quick tip is to first make a template of appropriate size on a paper and then transfer it to deadening mat. That will help to place it accurately and avoid wasting a material. Use a stationary knife or construction scissors to cut a desired shape and size. Be careful and use gloves for your hands protection.
STEP 4
Next, place a deadening mat to the surface without removing a protective film. Make sure that it properly covers the surface. Now it’s time to remove the protective paper film but do not pull it all at once, do that gradually for better adhesion. Once on a surface, press it down and let it glue. Flatten the sheet with your hands to avoid air bubbles between a mat and metal surface. Use a rolling tool to press mat down to a metal surface. Special dimples-like foil embossing on a mat surface allows to see the spots that need more pressure. You’d have to roll it down till the foil texture becomes smooth and plain which m
|
|
|
|
|
|---|---|---|---|
|
|
|
|
|
|---|---|---|---|
Related products
-
TAM815016L Hydraulic Low Profile Aluminum and Steel Racing Floor Jack with Dual Piston Quick Lift Pump, 1.5 Ton (3,000 lb) Capacity, Black
Original price was: $213.05.$177.54Current price is: $177.54.Add to cart- Racing floor jack can be used for general or specialty use and features a 1. 5 ton (3, 000 lb) capacity
- Constructed of durable, high-strength aluminum and steel; Equipped with a dual piston quick lift pump, allowing you to easily raise the jack to the desired height
- Lifting range from 3-1/2″ to 14-1/8″ allows you can gain easy access under low-profile vehicles
- Foam bumper on the handle helps protect your vehicle from damage; Convenient side handle makes it easy to carry
-
9003PRB2 Vision Headlight Bulb, (Pack of 2)
Original price was: $49.32.$41.10Current price is: $41.10.Add to cart- Get up to 30% more vision on the road compared to a standard minimum legal requirements in low beam headlamp test results
- Choose Philips Vision headlights for increased comfort and safety
- Original equipment quality seal for the most reliable performance
- All Philips upgrade headlights are DOT compliant
- Headlight bulbs by Philips, for over 100 years we have been continuously innovating automotive lighting
- When installing a new bulb, never touch the glass. Either use gloves or paper towel when handling.
-
CAMCO 40155/40158 RV White Polypropylene Vent Lid-Ventline, Pre 2008 and Elixir Since 1994
Original price was: $44.05.$36.71Current price is: $36.71.Add to cart- Replace damaged or old RV vent lid
- For Ventline (prior to 2008) and Elixir (1994 and up)
- Impact resistant
- Preassembled and includes all mounting hardware for quick, easy installation
- Durable polypropylene construction
- Replace the RV vent lid
- Impact resistant
- Preassembled and includes all mounting hardware for quick, easy installation
-
Car and Truck Seat Cushion – Memory Foam Wedge Chair Driving Pillow (Black)
Original price was: $72.79.$60.66Current price is: $60.66.Add to cart- ?Upgrades the Feel of Your Car Seats: Made with 100 percent premium memory foam, the car seat cushion provides the extra padding needed to support a better driving experience
- ?Car Seats Are Rough On Your Tailbone, But Not Anymore: Hard seating can lead to unwanted pressure in the tailbone. Our car cushion’s “U” shaped cutout suspends your coccyx, reducing discomfort
- ??The Perfect Car Seat Cushions for Short People: With a 3″ thickness, our car seat pad acts as a seat riser, providing several inches of lift to improve your viewing angle
- ?Driving Just Got a Lot More Comfortable: Car seats often lack support, causing pain in your back, hips, and legs. Our seat cushion cradles those areas to reduce pressure and improve comfort
- ??Certified Safe Materials: In our commitment to providing you with high quality items, our memory foam wedge cushion has been tested by OEKO-TEX to earn their coveted STANDARD 100 label; meaning every component of our car cushion is certified safe and harmless
- ?Retains Its Shape Use After Use: Sit on your seat cushion for car as much as you’d like without worry of it ever flattening; slow rebounding memory foam retains its shape, resisting wear and tear
- ?Designed With All Seating in Mind: While perfect for car seats, the ergonomic design also works well for office chairs, wheelchairs, dining chairs, and stadium seats
